Task: | Program |
---|---|
Structure: | Closed-Loop |
Mathematical Model: | Linear |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Type | Y2 | |||
Model | Y1-4KW | Y1-7.5KW | Y1-11KW | Y1-15KW |
Rated Power | 0.75-4KW | 1.1-7.5KW | 1.1-11KW | 2.2-15KW |
Rated Input Voltage | 380+10%/50Hz or 60Hz | |||
Qty.of Controlled Pumps | Single pumps | |||
Display | LCD display | |||
Signal Transmission Mode | Level float switch Level probe Pressure switch Electric contact pressure gauge |
|||
Water Level Indication | High/Middle/Low | |||
Max.Control Distance | ≤2000m without strong electric and electromagnetic fields | |||
Over/under-voltage Range | 304V-456V(adjustable) | |||
Main Functions | 1,Pressure control: electric contact pressure gauge or pressure switch 2,Water level control: probe or float switch 3,Multifunction display - visualization of: voltage, motor current, upper/lower tank status and alarms 4,Upper tank for water supply control and lower tank for drainage control 5,Operation mode: AUTO/MANUAL switch 6,Fault indication: fault tracking,last 10 fault reason display,audio/light alarms. 7,Anti-rust protection,long-term non-use of the pump,15 days to start once. 8,Setting protection current for motor overload/no-load,no-load delay restart time adjustable. 9,Automatic restart when voltage comes to normal rating after over-voltage/under-voltage protection. 10,Automatic restart after power failure recovery. 11,Time setting ON/OFF 12,Push button for adjustments and set up from display 13,Restore factory setting: press both "Overload" and "NO-Load"for 3 seconds. 14,Automatic re-starting pump from dry run,restart time range 0-720 minutes adjustable. |
|||
Working temperature Working humidity Degree of protection Install position |
-20ºC-- +80ºC 20%--90%RH, no drips concreted IP54 Wall mounting |
|||
Product Size | 320x220x125mm | |||
Package | Box size:26.2*17.2*38cm Carton size:54*39.5*55.5cm PCS/CTN:6 |
Parameter Setting and Instruction
P01--Over-load protection current setting
P02--No-load protection current setting
P03--Time setting ON
P04--Time Setting OFF
P05--Restart time setting after no-load protection
P06--Dual pump alternation time setting
P07--Over-voltage protection setting
P08--Under-voltage protection setting
P09--LCD backlight OFF time setting
P12--No load protection trip delay time setting
P13--Overload protection trip delay time setting
Suppliers with verified business licenses